|
We ship worldwide.
We accept
for international order.
International dealers are welcomed.
| |
 |
NRX-18 RTR Kit
- High efficiency shaft drive system
- Fully adjustable independent suspension
- Adjustable front and rear roll centers
- Uniquely designed 3-in-1 receiver, speed controller & servo
- Fully sealed bearing set
- Easy access differentials
- Designed, tuned & tested by Mr. Hirosaka
- 1000mah Battery pack & Transmitter included
NRX-18 PRO Kit
- Full option kit w/ clear body & tire set
- Battery, radio, receiver, speed controller & servo to be purchased
separately
|
 |
Nanda NRB-3 1/8 Scale Racing Buggy RTR Kit
- High Performance 21 size off-road pull start engine.
- 2-Channel transmitter including 8kg servo for steering with built-in
power saving concept upper deck.
- Monopoly of innovative C block for quick caster angle adjustment.
Adjustable angles from 17-23 degrees.
- High quality 6061 alum chassis
- Quick remove/install center differential block. Change your center
diff in less than 5mins.
- Maximum suspension arm travel design for better handling on rough
surface.
- Closed and dust/fuel proof radio box design.
- Centralise engine position with 50:50 front and rear weight balance.
- 15mm diameter shock body provides maximum traction.
- Pre-painted body.
|
 |
|
Length - 490mm
Height - 210mm
Wheel base - 348mm
Tyres - 144 x 74mm
Front track - 390mm
Rear track - 392mm
Ground clearance - 58mm |
GV LEOPARD 1/8TH PAINTED
TRUGGY
- Factory built with pre-painted and decaled body
- Low mounted chassis components help ensure a low centre of
gravity which helps ensure great handling
- Strong High performance long travel, oil filled adjustable
aluminum shocks absorbers
- Tough 3mm aluminum chassis
- Adjustable servo savers to protect servos
- Dual adjustable breaks
- Separate receiver and battery strong box
- Strong durable suspension arms
- Front and rear chassis braces to prevent chassis flexing
- Quick fill fuel tank
- Up to a massive 90mm of adjustable suspension travel with
optional droop adjustment
- Rear anti roll bar for added traction out of corners
- Front and rear shock towers with 8 front and 8 rear mount
positions
- High performance, long travel shock absorbers
- Oversize wheels with pre-glued high traction tyres
|
 |
< Technical Data >
+ Length------------442mm
+ Width-------------262mm
+ Wheel Base--------299mm
+ Tread (F/R)--------216.2mm/202.5mm
+ Ｆ.caster Angle-----8.5°～15.5° Adjustable
+ Gear Ratio---------1st. 6.92:1/2nd. 5.52:1
< Features >
+Belt Drive 4WD
+Double Shoe Type Clutch
+Shoe Type 2 Speed Gear Box
+Adjustable (Body Position) F/R Body Mount
+Adjustable (Angle) Front Anti-Roll Bar
+Adjustable Front Bump Stop/Rebound Stop
+Adjustable Rear Bump Stop/Rebound Stop
+Adjustable (Ackerman) Servo Saver
+Ventilated Brake Disk
+Low Gravity Battery Holder
+Carbon Radio Plate
+F/R Carbon Damper Stay
+5m/m (A70-75) Chassis
+125 c.c. Low Height Fuel Tank, Filter-equipped
+Belt Tensioner
+Full Ball Bearing
|
 |
|
  |
| 1/10 Electric On-Road Sedan RTR. Include car kit with ESC, Motor,
Painted Body, Drift Tire Set, Radio Transmitter & Servo |
 |
|
|
Mammoth Size, Mammoth
Performance. You'll dominate Unlimited Monster Truck Class with the Mammoth
ST. This purpose built truck, inspired by the awesome performance and size
of the original Mammoth, is a no-compromise, no-holds-barred, hi-performance
race truck.
- Low CG
- Clean and easy-to-maintain chassis
layout
- 2-speed tranny
- All-new diff housings
- New multi-support upper arms
- Thick low-profile shock towers
- Increased suspension travel
- 17mm hubs race wheels
XTM also features several tuning and
hopup options so you can customize the truck to suit your needs and driving
style. From hard-anodized 5mm shock towers to an optional reverse module,
the ST will prove itself in every condition, from the backyard basher to the
unlimited monster truck racer. |
|
